九州大学 建設設計工学研究室

english

研究

研究成果

学術論文

2019
武藤和好,貝沼重信,杜錦軒,劉少博,楊沐野,宮田弘和:クロスカットを有するAl-5Mg合金溶射と重防食塗装の重ね部の耐食・防食特性に関する基礎的研究,土木学会論文集A1, 2019(掲載準備中).
貝沼重信,キムアラン,池田龍哉,小寺健史:ブラスト処理の研削材と施工条件が鋼素地表面性状と研削材の残留度に及ぼす影響, 防錆管理, Vol.63, No.8, pp.285-300, 2019.
S. Kainuma, M. Yang, S. Ishihara, A. Kaneko and T. Yamauchi : Corrosion Protection of Steel Members Using An Al-Zn Base Sacrificial Anode and Fiber Sheet in An Atmospheric Environment, Construction & Building Materials, Vol.224, pp.880-893, 2019.
貝沼重信,山下和也,石原修二,兼子彬,山内孝郎:Al-3Zn合金鋳造板と架橋型アクリレート繊維シートを用いた大気犠牲防食技術の鋼道路橋に対する適用性, 防錆管理, Vol.63, No.5, pp.161-176, 2019.
Z.Y.Zhou, B.Ji, Z.Fu, S.Kainuma and S.Tsukamoto : Fatigue Crack Retrofitting by Closing Crack Surface, International Journal of Fatigue, Vol.119, 229-237, 2019.
2018
竹田智紀,貝沼重信,中野慶彦,緒方一真:様々な大気環境に曝される都市内高架橋の腐食進行性評価に関する研究, 土木構造・材料論文集, Vol.34, pp.97-104, 2018.
Y. Gao, M. Yang, S. Kainuma, S. Ishihara, M.Hashimoto : Electrochemical Properties of Hot-dip Aluminized Coating in Alkaline Environment, Journal of Structural and Materials in Civil Engineering No.34 p.89-95, 2018.
劉少博,貝沼重信,杜錦軒,武藤和好,宮田弘和:Al-5Mg合金溶射と重防食塗装の重ね部の飛来海塩環境における耐食・防食性能に関する基礎的研究, 土木構造・材料論文集, Vol.34, pp.36-57, 2018.
貝沼重信,増本岳,楊沐野,佐島隆生:近接する塗膜傷間における鋼材腐食の電気化学機構に関する基礎的研究, 材料と環境, Vol.67, No.11, pp.467-473, 2018.
武藤和好,貝沼重信,劉少博,杜錦軒,宮田弘和:飛来海塩環境におけるAl-5Mg合金溶射と重防食塗装の重ね部の耐食・防食特性, 鋼構造年次論文報告集, Vol.26, pp. 412-419, 2018.
貝沼重信,井上大地,池田幹友,森山実加子,石原修二:セメント系塗料の鋼材角部防食下地材への適用に関する基礎的検討, 鋼構造年次論文報告集, Vol.26, pp. 736-743, 2018.
キムアラン,貝沼重信,池田龍哉,小寺建史:ブラスト研削材の使用繰返数が鋼素地表面性状に及ぼす影響評価, 鋼構造年次論文報告集, Vol.26, pp.307-311, 2018.
貝沼重信,楊沐野,石原修二:地際部腐食センサを用いた鋼部材の気液界面の腐食性評価に関する研究, 材料と環境, Vol.67, No.10, pp.404-415, 2018.
L.Liu, C.N. Xu, A. Yoshida, D. Tu, N. Ueno, S. Kainuma : Scalable Elasticoluminescent Strain Sensor for Precise Dynamic Stress Imaging and Onsite Infrastructure Diagnosis, Advanced Materials Technology, 1800336, 2018.
天野佳絵,森山実加子,池田幹友,日比野誠,貝沼重信:高炉スラグ混合セメント系防食塗料の防食特性に関する電気化学的検討,材料と環境 材料と環境2018講演大会論文 Vol. 67, No.8, pp.191-201, 2018.
S. Kainuma, M. Yang, and Y.S. Jeong : Fatigue Behavior Investigation and Stress Analysis for Rib-To-Deck Welded Joints in Orthotropic Steel Decks, International Journal of Steel Structures, Vol.18 pp.512-527, 2018.
2017
S. Kainuma, Y. Yamamoto, J.H. Ahn and Y.S. Jeong : Evaluation method for time-dependent corrosion depth of uncoated weathering steel using thickness of corrosion product layer, Structural Engineering and Mechanics, Vol. 65, No.2, pp.191-20, 2017.
八木孝介,貝沼重信,平尾みなみ:熱伝導性を考慮した鋼構造部材の腐食環境モニタリングに関する基礎的研究, 土木構造・材料論文集, No.33, pp.49-57, 2017.
Y.S. Jeong, S. Kainuma and J.H. Ahn, W.H. Lee : Assessment of Fatigue Life of Out-Of-Plane Gusset Welded Joints Using 3D Crack Propagation Analysis, Journal of the Korea Institute for Structural Maintenance and Inspection, Vol.22, No.31, pp.129-136, 2017.
M. Yang, S. Kainuma and Y.S. Jeong : Structural Behavior of Orthotropic Steel Decks with Artificial Cracks in Longitudinal Ribs, Journal of Constructional Steel Research, Vo.141 pp.132-144, 2017.
貝沼重信,八木孝介,平尾みなみ,橋本幹雄,宇都章彦:海岸環境で約25年間供用された溶融アルミニウムめっき桟橋の腐食性と耐食・防食性,防錆管理, Vol.723, No.9, pp.329-340, 2017.
池田鮎美,甲斐信博,椎本圭一,貝沼重信:大気環境における球状黒鉛鋳鉄の腐食挙動に関する基礎的研究, 鋼構造年次論文報告集, Vol.25, pp.679-683, 2017.
井上大地,内田大介,浅野浩一,貝沼重信,増本岳:耐候性鋼材を用いた高力ボルト摩擦接合面の表面粗さとすべり係数, 鋼構造年次論文報告集, Vol.25, pp.48-54, 2017.
貝沼重信,杜錦軒,武藤和好,宮田弘和:Al-5Mg 合金溶射と重防食塗装の重ね部の耐食性向上法に関する基礎的研究, 鋼構造年次論文報告集, Vol.25, pp.673-678, 2017.
武藤和好,貝沼重信,杜錦軒,八木孝介,宮田弘和:大気環境中のAl-5Mg 合金溶射と重防食塗装の重ね部の耐食・防食特性, 鋼構造年次論文報告集, Vol.25, pp.708-712, 2017.
キムアラン,貝沼重信,渡邉亮太,池田龍哉,小寺建史:ブラスト処理条件が鋼素地の表面性状と研削材残留度に及ぼす影響, 鋼構造年次論文報告集, Vol.25, pp. 737-742, 2017.
広野邦彦,福田雅人,武藤和好,貝沼重信,杦本正信:レーザー散乱光を用いたブラスト鋼板の表面粗さの測定と評価, 鋼構造年次論文報告集, Vol.25, pp.713-720, 2017.
谷川慶太,貝沼重信,井口進,坂本達朗,石原修二:溶接継手部の塗膜劣化・腐食特性に及ぼす影響因子の評価, 鋼構造年次論文報告集, Vol.25, pp.747-752, 2017.
八木孝介,貝沼重信,加藤禎洋,石田直己:河川鋼製水門における各構造部位の腐食性評価, 鋼構造年次論文報告集, Vol.25, pp.721-728, 2017.
百田寛之,貝沼重信,田畑晶子,井口進,塚本成昭:フィンガープレートの犠牲陽極防食法に関する電気化学的検討, 鋼構造年次論文報告集, Vol.25, pp.684-687, 2017.
貝沼重信,藤本拓史,杜錦軒,楊沐野,武藤和好,宮田弘和:Al-5Mg合金溶射と重防食塗装の取合部における耐食・防食特性に関する基礎的研究, 土木学会論文集A1, Vol.73, No.2, pp.496-511, 2017.
S.Kainuma, M.Yang, Y.S.Jeong, S.Inokuchi, A.Kawabata, D. Uchida : Analysis Investigation for Fatigue Behavior of Rib-to-Deck Welded Joints with Different Structural Parameters in Orthotropic Steel Decks, Engineering Failure Analysis, Vol.79 pp.520-537,2017.
A. Yoshida, L. Liu, D. Tu, S. Kainuma, C.N. Xu : Mechanoluminescent Testing as an Efficient Inspection Technique for the Management of Infrastructures, Journal of Disaster Research, Vol.12, No.3, pp.506-514, 2017.
貝沼重信,土橋洋平,石原修二,内田大介,兼子彬,山内孝郎 : Al-Zn陽極材と吸水・保水繊維シートを用いた鋼部材の大気犠牲陽極防食技術に関する研究, 土木学会論文集A, Vol.73, No.2, pp.313-329, 2017.
井口進,内田大介,鄭暎樹,貝沼重信:鋼床版上面の架設用吊金具残し部の疲労耐久性に関する実験的検討, 鋼構造論文集, Vol.24, No.93, pp.73-81, 2017.
貝沼重信,小林淳二,宇都宮一浩,坂本 達朗 : 塗膜欠陥の寸法・近接度が鋼材の腐食挙動に及ぼす影響に関する基礎的研究, 土木学会論文集A1, Vol.73, No.1, pp.84-97, 2017.
八木孝介,貝沼重信,平尾みなみ,塚本成昭,吉田貴保:漏水の影響を受ける都市内高架橋鋼桁端部の腐食挙動に関する基礎的検討,土木構造・材料論文集,No.32,pp.39-45,2017.
藤本拓史,貝沼重信,宮田弘和:Al-Mg合金溶射/Znめっき,Zn溶射のガルバニック腐食特性に関する電気化学的検討, 土木構造・材料論文集, No.32, pp.55-62, 2017.
2016
貝沼重信:鋼橋の腐食性・腐食環境評価のための小片裸鋼板とACM型腐食センサの適用とその事例, 防錆管理, Vol.58, No.11, pp.446-453, 2016.
貝沼重信,郭小竜,小林淳二,武藤和好,宮田弘和 : NaClによる高腐食性環境におけるAl-5Mg合金溶射皮膜の耐食・防食特性に関する基礎的研究, 土木学会論文集A, Vol.72, No.3, pp.440-452, 2016.
田淵大介,佐島隆生,貝沼重信,八木伸曉,内田大介 : 面外ガセット溶接継手の疲労強度向上のためのまわし溶接止端部の溝加工法の検討, 鋼構造年次論文報告集, Vol.24, pp.590-597, 2016.
貝沼重信,八木孝介,郭小竜,小林淳二,佐島隆生 : 防食皮膜試験体に導入するクロスカットの機械加工法に関する基礎的検討, 鋼構造年次論文報告集, Vol.24, pp.733-739, 2016.
百田寛之,貝沼重信,鄭暎樹,田畑晶子,塚本成昭 : 疲労損傷を有する橋梁フィンガージョイントの腐食表面性状に関する基礎的研究, 鋼構造年次論文報告集, Vol.24, pp.701-704, 2016.
M. Yang, S. Kainuma and Y.S. Jeong : Analytical Investigations on The Structural Behavior of Orthotropic Steel Deck With Artificial Fatigue Cracks in U-Ribs, Journal of Constructional Steel Vol.24 489-492, 2016.
貝沼重信,細見直史:腐食促進試験に基づく鋼部材のコンクリート境界部における経時腐食挙動の基礎的検討, コンクリート工学, Vol.54, No.9, pp.259-269, 2016.
S. Kainuma, Y. S. Jeong, M. Yang and S. Inokuchi : Welding Residual Stress in Roots Between Deck Plate and U-Rib in Orthotropic Steel Decks, Measurement, Vol.92, pp.475-482, 2016.
貝沼重信,道野正嗣,山本悠哉,藤岡靖,藁科彰,高木真一郎,仲健一:高腐食性環境における無塗装耐候性鋼上路トラス橋における腐食損傷の要因推定と腐食性評価(その3)-部位レベルの腐食環境と腐食性の評価-, 防錆管理, Vol.60, No.9, pp.338-346, 2016.
貝沼重信,土橋洋平,石原修二,内田大介,兼子彬,山内孝郎:Al-Zn合金鋳造板と繊維シートを用いた鋼部材の大気犠牲陽極防食技術に関する基礎的研究, 材料と環境, Vol.65, No.9, pp.390-397, 2016.
S. Kainuma, Y. Tsuchihashi, S. Ishihara, D. Uchida, A. Kaneko and T. Yamauchi : Fundamental Study on Anti-corrosive Method with Sacrificial Anode for Steel Members using Al-Zn Alloy Casting Plate and Fiber Sheet in Atmospheric Environment, Corrosion Engineering, Vol.65, No.9 pp.309-318, 2016.
貝沼重信,道野正嗣,山本悠哉,藤岡靖,藁科彰,高木真一郎,仲健一:高腐食性環境における無塗装耐候性鋼上路トラス橋における腐食損傷の要因推定と腐食性評価(その2)-腐食環境評価と腐食要因分析-, 防錆管理, Vol.60, No.8, pp.298-305, 2016.
J.H. Ahn, S. Kainuma, W.H. Lee, Y.S. Jeong, I.T. Kim : Relationships between Imperfections and Shear Buckling Resistance in Web Plate with Sectional Damage Caused by Corrosion, Advances in Materials Science and Engineering, Vol.2016, Article ID 6467589, 12 pages, 2016.
藤岡靖,藁科彰,高木真一郎,仲健 一,貝沼重信,道野正嗣,山本悠哉:高腐食性環境における無塗装耐候性鋼上路トラス橋における腐食損傷の要因推定と腐食性評価(その1)―腐食損傷の調査―, 防錆管理, Vol.60, No.5, pp.165-172, 2016.
坂本達朗,貝沼重信:塗装さび鋼板を用いた塗装鋼構造物の腐食度評価に関する検討,防錆管理, Vol.60, No.5, pp.165-172, 2016.
S. Kainuma, M. Yang, Y.S. Jeong, S. Inokuchi, A. Kawabata and D. Uchida : Experiment on Fatigue Behavior of Rib-To-Deck Weld Root in Orthotropic Steel Decks, Journal of Constructional Steel Research, Vo.119, pp.113-122, 2016.
2015
坂本達朗,貝沼重信,小林淳二:塗装した腐食炭素鋼のさび性状と塗膜耐久性の関係に関する検討,材料と環境,速報論文,Vol.64,No.7,pp.307-310,2015.
渡邉亮太,貝沼重信,鄭映樹:化学的素地調整が鋼材の表面性状に及ぼす影響に関する研究, 鋼構造年次論文報告集, Vol.23, pp.372-377,2015.
北川尚男,貝沼重信,小林淳二,郭小龍:水性塗膜剥離剤を用いた塗替え塗装鋼板の耐久性に関する基礎研究, 鋼構造年次論文報告集, Vol.23, pp.489-492,2015.
S. Kainuma, Y. S. Jeong, J. H. Ahn, Y. Yamagami and S. Tsukamoto : Behavior and Stress of Orthtropic Deck with Bulb Rib by Surface Corrosion, International Journal of Steel Structure, Vol.113, pp.135-145, 2015.
S. Kainuma, J. H. Ahn, Y. S. Jeong, H. Sugiyama and M. Iwasaki : Evaluation of Structural Responses on Artificial Fatigue Crack for Bulb Rib Orthotropic Deck, Advanced in Structural Engineering, Vol.18, No.9, pp.1355-1369, 2015.
S. Kainuma, Y. S. Jeong and J. H. Ahn : Stress Distribution on the Real Corrosion Surface of the Orthotropic Steel Bridge Deck, Steel and Composite Structures, Vol.18, No.6, pp.1479-1492, 2015.
貝沼重信 : 大気環境における構造用鋼材の腐食表面性状とその経時性予測, 表面科学,Vol.36, No.1, pp.35-40, 2015.
今村壮宏,山下恭敬,松田哲夫,岩崎雅紀,永田淳,貝沼 重信 : 非合成補剛トラス吊橋における床組支承回りの疲労損傷対策, 構造工学論文集,Vol.61A,pp. 473-485, 2015.
2014
道野正嗣,貝沼重信,林秀幸,鄭暎樹,板井麻理子 : 大気環境における無塗装鋼板の腐食挙動に及ぼす熱容量の影響に関する基礎的研究, 鋼構造年次論文報告集, Vol.22, pp.938-942, 2014.
藤井基史,貝沼重信 : ブラスト処理の施工条件が鋼材の粗さに及ぼす影響, 鋼構造年次論文報告集, Vol.22, pp.469-476, 2014.
土橋洋平,貝沼重信,友田富雄,南和彦 : 水膨潤ゴムを用いた鋼部材コンクリート地際部の犠牲陽極防食技術に関する基礎的検討, 鋼構造年次論文報告集, Vol.22, pp.924-930, 2014.
石原修二,貝沼重信,内田大介,兼子彬,山内孝郎 : 多孔質Al-Zn焼結板と保水性繊維シートを用いた高耐久性大気腐食環境センサに関する基礎的研究, 鋼構造年次論文報告集, Vol.22, pp.477-481, 2014.
貝沼重信,小林淳二,山本悠哉: 飛来塩環境における無塗装鋼材の水洗浄による腐食遅延効果, 鋼構造年次論文報告集, Vol.22, pp.917-923, 2014.
鄭暎樹,貝沼重信,八木伸暁,内田大介 : 3 次元き裂進展解析による面外ガセット継手の疲労き裂進展評価, 鋼構造年次論文報告集, Vol.22, pp.789-794, 2014.
坂本達朗,太田達哉,貝沼重信 : 室内促進劣化試験における塗装さび鋼板の質量変化量評価, 鋼構造年次論文報告集, Vol.22, pp.504-509, 2014.
細見直史,山田隆明,貝沼重信 : 地際腐食の非接触・非破壊検査システム, 建設機械施工, Vol. 66, No. 7, pp.52-56, 2014.
石原修二,貝沼重信,木下優,内田大介,兼子彬,山内孝郎 : 多孔質焼結板と繊維シートを用いた腐食鋼部材の大気犠牲陽極防食効果に関する基礎的研究, 材料と環境, Vol.63, No.12, pp.609-615, 2014.
S. Ishihara, S. Kainuma, M. Kinoshita, D. Uchida, A. Kaneko and T. Yamauchi : Fundamental Study on Corrosion Protection Effect with Sacrificial Anode for Corroded Steel Members using Porous Sintered Plate and Fiber Sheet in an Atmospheric Environment, Corrosion Engineering, Vol.63, No.12, pp. 497-505, 2014.
貝沼重信 : 鋼道路橋の腐食損傷の現状と課題, 防錆管理,Vol.58,No.11,pp.432-439, 2014.
S. Kainuma, J. H. Ahn and Y. S. Jeong : Investigation on The Stress Concentration Effect at The Corroded Surface Achieved by Atmospheric Exposure Test, Materials Science & Engineering A, Vol.602, No.25, pp.89-97, 2014.
S. Kainuma, J. H. Ahn, Y. S. Jeong, T. Imamura and T. Matsuda : Applicability and Structural Response Comparisons for Bearing System Replacement in Suspension Bridge Rehabilitation, Journal of Constructional Steel Research, Vol.95, pp.172-190, 2014.
貝沼重信,山本悠哉,林秀幸,伊藤義浩,押川渡:Fe/Ag対ACM型腐食センサを用いた大気環境における無塗装普通鋼板の経時腐食深さの評価方法, 材料と環境, Vol.63, No.2, pp.50-57, 2014.
S. Kainuma, Y. Yamamoto, H. Hayashi, Y. Itoh and W. Oshikawa : Practical Method for Estimating Time-Dependent Corrosion Depth of Uncoated Carbon Steel Plate under Atmospheric Environment using Fe/Ag Galvanic Couple ACM-Type Corrosion Sensor, Corrosion Engineering, Vol.63, No.2, pp.44-53, 2014.
2013
貝沼重信,杜金威,内田大介,八木伸曉,久保博司:片側すみ肉溶接を有する面外ガセット溶接継手の疲労挙動, 溶接学会論文集, 第31巻, 第4号, pp.238-245, 2013.
伊藤義浩,貝沼重信:炭酸ガス環境におけるFe/Ag対ACMセンサの出力特性の調査 ─転炉配管内の腐食環境評価に対するACMセンサの適用性に関する基礎的研究─, 防錆管理, Vol.57, No.11, pp.14-19, 2013.
石原修二,貝沼重信,兼子彬,山内孝郎:大気環境における鋼部材に及ぼす犠牲陽極材の設置方法の影響, 鋼構造年次論文報告集, Vol.21, pp. 181-184, 2013.
林秀幸,貝沼重信,山本悠哉,伊藤義浩:腐食生成物が鋼板さび厚の電磁膜厚計による測定精度に及ぼす影響, 鋼構造年次論文報告集, Vol.21, pp. 862-868, 2013.
木下優,貝沼重信,山上哲示,塚本成昭:コンクリート系材料の地際における鋼部材の腐食挙動に関する研究, 鋼構造年次論文報告集, Vol.21, pp. 185-192, 2013.
J. H. Ahn, S. Kainuma and I. T. Kim : Shear Failure Behaviors of A Web Panel with Local Corrosion Depending on Web Boundary Conditions, Thin-Walled Structures, Vol.73, pp.302-317, 2013.
S. Kainuma, J. H. Ahn and I. T. Kim : Corrosion pattern for Critical Shear Buckling Load of A Web Panel with Local Corrosion Damage, Applied Mechanics and Materials, Vol.421, pp.778-783, 2013.
J. H. Ahn, S. Kainuma and T. Imamura : Repair Method and Residual Bearing Strength Evaluation of A Locally Corroded Plate Girder at Support, Engineering Failure Analysis, Vol.33, pp.398-418, 2013.
J. H. Ahn, I. T. Kim, S. Kainuma and M. J. Lee : Residual Shear Strength of Steel Plate Girder due to Web Local Corrosion, Journal of Constructional Steel Research, Vol.89, pp.198-212, 2013.
J. H. Ahn, S. Kainuma and I. T. Kim : Shear Buckling Strengths and Post Buckling Behaviors of Steel Webs with Local Corrosion, Journal of JSCE, Vo.1, pp.251-261, 2013.
I. T. Kim, M. J. Lee, J. H. Ahn and S. Kainuma : Experimental Evaluation of Shear Buckling Behaviors and Strength of Locally Corroded Web, Journal of Constructional Steel Research, Vol.83, pp.75-89, 2013.
Y. S. Jeong, S. Kainuma and J. H. Ahn : Structural Response of Orthotropic Bridge Deck Depending on the Corroded Deck Surface, Construction & Building Materials, No.43, pp.87-97, 2013.
貝沼重信,宇都宮一浩,石原修二,内田大介,兼子彬,山内孝郎:大気環境における鋼部材の犠牲陽極防食に及ぼすAl-Zn多孔質焼結板の配合・気孔率と繊維シート特性の影響,材料と環境, Vol.62, No.8, pp.278-288, 2013.
S. Kainuma, K. Utsunomiya, S. Ishihara, D. Uchida, A. Kaneko and T. Yamauchi : Influences of Mixing and Porosity Ratios of Porous Sintered Al-Zn Plate and Material Property of Fiber Sheet on Anticorrosive Effects of Sacrificial Anode for Carbon Steel in Atmospheric Environment, Corrosion Engineering, Vol. 62, No.8, pp.205-218, 2013.
2012
藤井基史, 山内誉史, 内田大介, 平井大雅, 貝沼 重信:鋼床版デッキプレート上の吊り金具残し部が疲労損傷に及ぼす影響の解析的検討, 鋼構造年次論文報告集, Vol.20, pp.557-564, 2012.
林秀幸, 貝沼重信, 山本悠哉, 今村壮宏:飛来塩環境における上路トラス橋の構造部位のミクロ腐食環境評価, 鋼構造年次論文報告集, Vol.20, pp.297-302, 2012.
貝沼重信,山本悠哉,伊藤義浩,宇都宮一浩,押川渡:腐食生成物層の厚さを用いた無塗装普通鋼材の腐食深さとその経時性の評価方法, 材料と環境, Vol.61, No.12, pp.535-540, 2012.
S. Kainuma, Y. Yamamoto, Y. Itoh, K. Utsunomiya and W. Oshikawa : Evaluation Method for Corrosion Depth of Uncoated Carbon Steel and Its Time-Dependence Using Thickness of Corrosion Product Layer, Corrosion Engineering, Vol. 61, No. 12, pp. 483-494, 2012.
貝沼重信, 鄭映樹, 宇都宮一浩, 安鎭熙:空間統計学的手法を用いた大気腐食環境における無塗装普通鋼板の経時腐食表面性状の数値シミュレーション, 材料と環境, Vol.61, No.7, pp.283-290, 2012.
S. Kainuma, Y. S. Jeong and K. Utsunomiya: Numerical Simulations for Time-dependent Corrosion Surfaces of Unpainted Carbon Steel Plates in Atmospheric Corrosive Environments Using Spatial Statistical Techniques, Corrosion Engineering, Vol. 61, No. 7, pp. 203-212, 2012.
S. Kainuma, J. H. Ahn, Y. S. Jeong and H. Takahashi: Evaluation on Estimation in Characteristics of Fatigue Crack Using Micro-Encapsulated Dye Mixing Paint, Engineering Failure Analysis, Vol.25, pp.1-12, 2012.
井口進, 貝沼重信, 内田大介, 城大樹:製作時のプレス矯正が鋼床版のデッキプレートとUリブ溶接部の応力性状に及ぼす影響, 鋼構造論文集, 第19巻, 第73号, pp.1-8, 2012.
2011
貝沼重信, 宇都宮一浩, 石原修二, 内田大介, 兼子彬:多孔質焼結板と繊維シートを用いた鋼部材の大気環境における犠牲陽極防食技術に関する基礎的研究, 材料と環境, Vol.60, No.12, pp.535-540, 2011.
S. Kainuma, K. Utsunomiya, S. Ishihara, D. Uchida and A. Kaneko: Fundamental Study on Corrosion Protection of Steel Components with a Sacrificial Anode using a Porous Sintered Plate and Fiber Sheet in an Atmospheric Environment, Corrosion Engineering, Vol. 60, No. 12, pp. 444-451, 2011.
貝沼重信,山本悠哉, 伊藤義浩, 押川渡:Fe/Ag対ACM型腐食センサを用いた降雨を受ける無塗装普通鋼板の平均腐食深さの予測方法, 材料と環境, Vol.59, No.10, pp.497-503, 2011.
S. Kainuma, Y. Yamamoto, Y. Itoh and W. Oshikawa : Prediction Method for Mean Corrosion Depth of Uncoated Carbon Steel Plate Subjected to Rainfall Effect using Fe/Ag Galvanic Couple ACM-Type Corrosion Sensor, Corrosion Engineering, Vol. 60, No. 11, pp. 415-423, 2011.
加藤祐介, 貝沼重信, 山上哲示, 塚本成昭:腐食鋼部材とセラミック系材料の引張付着強度に関する研究, 鋼構造年次論文報告集, Vol.19, pp.581-584, 2011.
細見直史, 貝沼重信, 加藤祐介:腐食損傷した鋼床版デッキプレートの応力集中に関する解析的検討, 鋼構造年次論文報告集, Vol.19, pp.613-616, 2011.
藤井基史, 内田大介, 山内誉史, 井口進, 貝沼重信:吊金具の取付け精度が鋼床版のデッキプレートとUリブの溶接部の応力性状に及ぼす影響に関する解析的検討, 鋼構造年次論文報告集, Vol.19, pp.69-76, 2011.
宇都宮一浩, 貝沼重信, 鄭映樹:空間点過程の手法を用いた塗装鋼部材の点さび発生状況の評価に関する基礎的研究, 鋼構造年次論文報告集, Vol.19, pp.607-612, 2011.
2010
小林憲治, 日野伸一, 山口浩平, 貝沼重信: GFRP引抜き成形材の材料特性およびはり部材の曲げ挙動に関する基礎的研究, 土木学会論文集 A1, Vol. 67, No.1, 1-12, 2010.
石原修二, 貝沼重信, 宇都宮一浩, 内田大介:多孔質Al-Zn合金板と吸水・保水繊維による犠牲陽極防食効果に関する基礎的研究, 鋼構造年次論文報告集, Vol.18, pp.563-566, 2010.
伊藤義浩, 山下岳史, 貝沼重信, 向川優貴:炭酸ガス環境におけるACM型腐食センサの適用性, 鋼構造年次論文報告集, Vol.18, pp.551-554, 2010.
宇都宮一浩, 貝沼重信, 石原修二, 内田大介:大気腐食環境における犠牲陽極防食技術に関する基礎的研究, 鋼構造年次論文報告集, Vol.18, pp.543-546, 2010.
加藤祐介, 貝沼重信, 向川優貴:腐食環境が鋼部材の腐食表面性状に及ぼす影響に関する基礎的研究, 鋼構造年次論文報告集, Vol.18, pp.603-608, 2010.
向川優貴, 貝沼重信:塗装鋼部材の腐食表面性状の評価・予測手法に関する基礎的研究, 鋼構造年次論文報告集, Vol.18, pp.547-550, 2010.
山本悠哉, 貝沼重信, 向川優貴, 伊藤義浩:さび厚を用いた無塗装耐候性鋼部材の腐食深さの評価方法に関する基礎的研究, 鋼構造年次論文報告集, Vol.18, pp.567-570, 2010.
細見直史, 貝沼重信:コンクリート境界部で腐食した鋼構造部材の応力集中係数の評価・予測手法, 土木学会論文集 A, Vol. 66, No.4, pp.613-630, 2010.
2009
貝沼重信, 細見直史, 後藤淳, 伊藤義人:海洋環境下における長尺鋼部材の腐食挙動の評価・予測に関する基礎的研究, 土木学会論文集 A, Vol. 65, No.2, pp.440-453, 2009.
S. Kainuma and N. Hosomi: Fatigue Life Evaluation of Corroded Structural Steel Members in Boundary with Concrete, International Journal of Fracture, Vol.158, No.1, pp.149-158, 2009.
2008
貝沼重信, 香月大翔, 高橋秀樹:染料マイクロカプセル混入塗料による表面疲労き裂長さの推定に関する研究, 非破壊検査, Vol.57, No.12, pp.566-571, 2008.
貝沼重信, 尾上聡史, 三浦健一, 井口進, 川畑篤敬, 内田大介:鋼床版のデッキプレートとUリブの溶接ルート部の疲労き裂に対する試験システムの構築, 土木学会論文集 A, Vol.64, No.2, 297-302, 2008.
細見直史, 貝沼重信:コンクリート境界部で腐食した鋼構造部材の疲労挙動に関する基礎的研究, 土木学会論文集 A, Vol. 64, No. 2, pp.333-349, 2008.
S. Kainuma and T. Mori: A Study on the Fatigue Crack Initiation Point of Load-Carrying Fillet Welded Joints, International Journal of Fatigue, Vol.30, Issue 9, pp.1669-1677, 2008.
S. Kainuma, H. Katsuki, I. Iwai and M. Kumagai: Evaluation of Fatigue Strength of Friction Stir Butt-Welded Aluminum Alloy Joints Inclined to Applied Cyclic Stress, International Journal of Fatigue, Vol.30, Issue 5, pp.870-876, 2008.
2007
貝沼重信, 香月大翔, 高橋秀樹, 日野伸一: 染料マイクロカプセル混入塗料による貫通疲労き裂長さの推定に関する研究, 非破壊検査, 第56巻, 第9号, pp .479-484, 2007.
貝沼重信, 香月大翔, 岩井一郎, 熊谷正樹, 日野伸一: 作用応力に斜めのアルミニウム合金摩擦攪拌突合せ継手の疲労挙動, 溶接学会論文集, 第25巻, 第1号, pp.203-207, 2007.
2006
S. Kainuma and T. Mori: A Fatigue Strength Evaluation Method for Load- carrying Fillet Welded Cruciform Joints, International Journal of Fatigue, Volume 28, Issue 8, pp.864-872, 2006.
貝沼重信, 細見直史: 鋼構造部材のコンクリート境界部における経時的腐食表面性状の数値シミュレーション, 土木学会論文集 A, Vol.62, No.2, pp.440-453, 2006.
2005
I. T. Kim and S. Kainuma: Fatigue Life Assessment of Load-Carrying Fillet Welded Cruciform Joints Inclined to Uniaxial Cyclic Loadings, International Journal of Pressure Vessel and Piping, Vol.82, pp.807-813, 2005.
貝沼重信, 細見直史, 金仁泰, 伊藤義人: 鋼構造部材のコンクリート境界部における経時的な腐食特性に関する研究, 土木学会論文集, No.780/I-70, pp.97-114, 2005.
S. Kainuma and I .T. Kim: Fatigue Strength Evaluation of Load- Carrying Fillet Welded Cruciform Joints with Different Plate Thickness, International Journal of Fatigue, Vol.27, pp.810-816, 2005.
2004
貝沼重信, 細見直史, 金仁泰: 鋼製橋脚隅角部の疲労挙動に及ぼす溶接溶込み深さの影響, 第11巻, 第44号, pp.1-13, 2004.
貝沼重信, 楠本佳寛, 細見直史, 金仁泰: 異なる板厚を有する十字すみ肉溶接継手の疲労挙動, 第22巻, 第4号, pp.557-564, 2004.
伊藤義人, 金仁泰, 貝沼重信, 門田佳久: 素地調整が異なる塗装鋼板の腐食劣化特性および腐食耐久性, 土木学会論文集, No.766/I-68, pp.291-307, 2004.
伊藤義人, 劉斌, 宇佐見康一, 草間竜一, 貝沼重信: 車両衝突を受ける橋梁用鋼製防護柵のひずみ速度効果と性能照査に関する研究, 土木学会論文集, No.759/I-67, pp.337-353, 2004.
貝沼重信, 細見直史, 中根竜二: フェライト系ステンレス鋼のフランジへり溶接継手の溶接残留応力と疲労強度, 溶接学会論文集, 第22巻, 第1号, pp.117-125, 2004.
2003
伊藤義人, 金仁泰, 太田洋, 貝沼重信: 鋼材の耐久性評価のための環境促進実験に関する基礎的研究, 構造工学論文集, Vol.49A, pp.697-706, 2003.
貝沼重信, 細見直史, 金仁泰, 伊藤義人, 柿木信宏: 面外ガセット溶接継手の腐食特性と疲労挙動に関する基礎的研究, 構造工学論文集, Vol.49A, pp.707-715, 2003.
2002
貝沼重信, 柳沼安俊: 表面SH波による十字すみ肉溶接継手のル-トギャップの超音波測定, 非破壊検査, 第51巻, 11号, pp.733-739, 2002.
伊藤義人, 岩田厚司, 貝沼重信: 鋼材の腐食耐久性評価のための環境促進実験とその促進倍率に関する基礎的研究, 構造工学論文集, Vol.48A, pp.1021-1029, 2002.
2001
伊藤義人, 宇佐見康一, 貝沼重信, 杉江昌宣: アルミニウム合金製防護柵の実車衝突に関する数値解析的研究, 構造工学論文集, Vol.47A, pp.1707- 1717, 2001.
I. T. Kim, K. Yamada and S. Kainuma : Fatigue Behavior of Butt Welded Joints Containing Inclined Lack-of-Penetration, Structural Eng./Earthquake Eng., JSCE, No.675/I-55, pp.53-62, 2001.
貝沼重信, 森猛, 一宮充 : 荷重伝達型十字溶接継手の疲労破壊起点の評価方法の提案, 土木学会論文集, No.668/I-54, pp.313-318, 2001.
2000
貝沼重信, 高松大輔: 圧縮繰返し応力下における十字すみ肉溶接継手の疲労挙動, 鋼構造年次論文報告集, 第8巻, pp.723-730, 2000.
貝沼重信, 川本恭朗, 高松大輔, 山田健太郎: 溶接姿勢とル-トギャップが荷重伝達型十字溶接継手の疲労強度に及ぼす影響, 土木学会論文集, No.647/I-51, pp.435-445, 2000.
1999
山田健太郎, 貝沼重信, 香川直輝, 西岡敬治: 鋼I桁橋ウェブギャップ部の疲労試験と応力緩和による疲労寿命向上効果, 土木学会論文集, No.619/I-47, pp.267-278, 1999.
石井博典, 加賀山泰一, 新名勉, 貝沼重信, 山田健太郎: 補修溶接がウェブギャップ部の疲労性状に及ぼす影響, 構造工学論文集, Vol.45A, pp.1183-1191, 1999.
1998
貝沼重信, 山田健太郎, 香川直輝: 鋼I桁橋ウェブギャップ部の応力緩和による疲労寿命向上効果に関する疲労寿命解析, 鋼構造年次論文報告集, 第6巻, pp.435-442, 1998.
小塩達也, 山田健太郎, 貝沼重信, 小幡敏幸, 古市亨: 鋼床版を用いた走行車輌の輪重推定, 構造工学論文集, Vol.44A, pp.1141-1151, 1998.
山田健太郎, 貝沼重信, 鈴木幹紹, 近藤明雅: 主板方向に静的荷重を受けるガセット溶接継手の疲労強度, 構造工学論文集, Vol.44A, pp.1073-1082, 1998.
1997
貝沼重信, 森猛, 一宮充: 十字すみ肉溶接継手のル-ト部から発生する疲労亀裂の進展性状, 鋼構造論文集, Vol.4, No.14, pp.1-8, 1997.
貝沼重信, 山田健太郎, 西岡敬治, 中村一平, 石井博典: 鋼I桁橋の主桁上フランジと横桁の取合部の応力緩和による疲労強度向上法, 構造工学論文集, Vol.43A, pp.927-936, 1997.
1996
貝沼重信, 山田健太郎, 上仙靖, 岩崎雅紀, 西川武宏: 縦リブの疲労き裂が鋼床版に及ぼす影響の実測と解析, 構造工学論文集, Vol.42A, pp.927-936, 1996.
1994
森猛, 貝沼重信: 荷重伝達型十字すみ肉溶接継手・ル-ト破壊の疲労強度評価方法の提案, 土木学会論文集, No.501/I-29, pp.95-102, 1994.
1993
森猛, 貝沼重信, 三木千壽: 荷重伝達型十字すみ肉溶接継手ル-ト破壊の疲労強度解析, 構造工学論文集, Vol.39A, pp.937-946, 1993.

国際会議論文(1994-)

2019
M. Yang, S. Kainuma, W. Xu : Experimental Study on The Fatigue Fracture Mechanism of Finger Type Expansion Joint, Pacific Structural Steel Conference, Tokyo, Japan, 2019.
A. Kim, S. Kainuma, T. Ikeda, T. Kotera : Effect of Blasting Conditions on Characteristics of Steel Surface and Residual Abrasive Material, Pacific Structural Steel Conference, Tokyo, Japan, 2019.
M. Yang, S. Kainuma, X. Sun : Electrochemical Evaluation on Corrosion Rate of Common Steel Near The Air-Liquid Interface Using An Immersion Sensor, East Asia & Pacific Area Conference & Expo, Yokohama, Japan, 2019.
S. Zhuang, S. Kainuma, M. Yang, K. Okuda, M. Fukuda : Evaluation of Electrochemical Properties of Laser-Cleaned Carbon Steel Plate, East Asia & Pacific Area Conference & Expo, Yokohama, Japan, 2019.
Y. Gao, M. Yang, S. Kainuma, S. Ishihara, M. Hshimoto : Electrochemical Properties of Hot-dip Al and Al-45Zn Coating, East Asia & Pacific Area Conference & Expo, Yokohama, Japan, 2019.
A. Kim, S. Kainuma, T. Ikeda, T. Kotera : Effect of Repeated Cyclic Using of Blast Abrasive Material on The Steel Surface Characteristics, The 2019 World Congress on Advances in Structural Engineering and Mechanics, Jeju, Korea, 2019.
S. Kainuma, M. Yang, Y.S. Jeong : Stress Behaviors for Corroded Surface of Fatigue-Cracked Orthotropic Steel Deck, 3rd International Conference on Structural Integrity and Durability, Dubrovnik, Croatia, 2019.
2017
M. Yang, S. Kainuma, T. Tomoda, K. Minami : Study on Anti-Corrosive Method with Sacrificial Anode for Embedded Steel Members using Water Swelling Rubber, 9th International Symposium on Steel Structures, Jeju, Korea, 2017.
S.Kainuma, Y. Yamamoto, A.R. Kim, Y.S. Jeong, J.H. Ahn : Prediction for Corrosion Depth of Weathering Steel Using Corrosion Product Layer, The 2017 World Congress on Advances in Structural Engineering and Mechanics, Soul, Korea, 2017.
S. Kainuma, J. Du, M. Yang, K. Muto, H. Miyata : Deterioration Behaviors of Overlapping Layers between Al-5Mg Alloy Thermal Spray Coating and Heavy-Duty Paint Coating, 16th International Conference on Fracture and Damage Mechanics, Key Engineering Materials, Florence, Italy, 2017.
2016
S. Kainuma, Y. Yamamoto, Y.S. Jeong : Practical Method for Estimating Time-Dependent Corrosion Depth of Uncoated Carbon Steel Plate Under Atmospheric Environment Using Fe/Ag Galvanic Couple ACM-Type Corrosion Sensor, 15th International Conference on Fracture and Damage Mechanics, Alicante, Spain, Key Engineering Materials, Vol.713, pp.187-191, Alicante, Spain, 2016.
M. Yang, S. Kainuma, Y.S. Jeong, S. Inokuchi, A. Kawabata, D. Uchida : Analytical Investigation for Stress Response of Orthotropic Steel Deck with Through-Deck Cracks, 5th International Symposium on Reliability Engineering and Risk Management, pp.445-448, Seoul, Korea, 2016.
G. Mashimoto, S. Kainuma, Y. S. Jeong : Spatial Statistics Simulation of The Corrosion Behavior of The Steel Members on Artificial Coating Defects, 5th International Symposium on Reliability Engineering and Risk Management, pp.385-388, Seoul, Korea, 2016.
J. Du, S. Kainuma, J. Kobayashi, Y.S. Jeong1, K. Muto, H. Miyata : Fundamental Study on Anti-Corrosion Characteristics of Overlapping Layer Between Thermal Sprayed Al-5Mg Coating and Heavy Duty Paint Coating, 5th International Symposium on Reliability Engineering and Risk Management, pp.377-380, Seoul, Korea, 2016.
R. Watanabe, S. Kainuma, Y. S. Jeong, J. Kobayashi, W. Oshikawa : Acceleration Coefficients of Cyclic Corrosion Test with Respect to Atmospheric Exposure Test for Uncoated Steel Plates, 5th International Symposium on Reliability Engineering and Risk Management, pp.381-384, Seoul, Korea, 2016.
K. Yagi, S. Kainuma, M. Hirao : Effect of Heat Capacity on Corrosion Behaviors of Uncoated Carbon Steel Under Various Atmospheric Environments Using Fe/Ag Galvanic Couple Corrosion Monitoring Sensors, 5th International Symposium on Reliability Engineering and Risk Management, pp.449-452, Seoul, Korea, 2016.
M. Hirao, S. Kainuma1, Y.S. Jeong, J. Kobayashi, X.Guo, T. Shinohara: Influence of Commencing Time of Exposure Test on Corrosion Behavior of Uncoated Common Steel and Weathering Steel, 5th International Symposium on Reliability Engineering and Risk Management, pp.457-460, Seoul, Korea, 2016.
S. Kainuma, Y. Tsuchihashi, Y.S. Jeong, S. Ishihara : Development of A Corrosion Monitoring Sensor for Structural Steel Member in Boundary With The Ground, 17th International Conference on Experimental Mechanics, CD-ROM, Rhodes, Greece, 2016.
T. Sakamaoto and S. Kainuma : Fundamental Research on Factors Affecting the Under-Film Corrosion Behavior of Coated Steel Members, 18th International Conference on Chemistry and Chemical Engineering, CD-ROM, Amsterdam, Netherlands, 2016.
International Scholarly and Scientific Research & Innovation, Vol.10, No.2, pp.232-237, 2016.
M. Yang, S. Kainuma, Y.S. Jeong, A. Kawabata, S.Inokuchi and D.Uchida : Parametric FE Analysis for Fatigue Behavior of Rib-to-Deck Welded Joints in Orthotropic Steel Decks, International Association for Bridge and Structural Engineering Spring Conference, CD-ROM, Guangzhou, China , 2016.
2015
S. Kainuma, Y.S. Jeong and J. Kobayashi : Influence of Size and Proximity of Paint Coating Defects on Corrosion Behavior of Carbon Steel Plates, 14th International Conference on Fracture and Damage Mechanics, Budva, Montenegro, Key Engineering Materials, Vol.665, pp.125-128, 2015.
Y. S. Jeong, S. Kainuma and T.Imamura : Corrosivity Evaluation for Each Structural Part of Steel Deck Truss Bridge Before and After Dam Construction, 2015 World Congress on Advances in Structural Engineering and Mechanics, CD-ROM, Inchon, South Korea, 2015.
M. Michino, S. Kainuma, Y. Yamamoto, Y. S. Jeong, Y. Fujioka, A. Warashina, S. Takagi and M. Uchino : Investigation for Corrosion Characteristic of Structural Members on Unpainted Weathering Steel Bridge, 2015 World Congress on Advances in Structural Engineering and Mechanics, CD-ROM, Inchon, South Korea, 2015.
Y. Tsuchihashi, S.Kainuma, Y. S. Jeong, S. Ishihara, D. Uchida, A. Kaneko and T. Yamauchi : Corrosion Protection Effect with Scrificial Anode for Corroded Stel Members Using Al-Zn Alloy Casting Materials and Fiber Sheet, 2015 World Congress on Advances in Structural Engineering and Mechanics, CD-ROM, Inchon, South Korea, 2015.
J. Kobayashi, S. Kainuma and Y. S. Jeong : Investigation on Correlation and Acceleration Coefficients of Accelerated Corrosion Tests to Atmospheric Exposure Tests, 2015 World Congress on Advances in Structural Engineering and Mechanics, CD-ROM, Inchon, South Korea, 2015.
2014
Y. S. Jeong, S. Kainuma and T. Imamura : Investigation for Effect of Local Corrosion Environment on Structural Member, 4th International Conference on Applied Science and Engineering, 2015 World Congress on Advances in Structural Engineering and Mechanics, CD-ROM, Soul, Korea, 2014.
S. Ishihara, S. Kainuma, D. Uchida, A. Kaneko and T. Yamauchi : Fundamental Study on Corrosion Protection of Steel Members with a Porous Sintered Al-Zn Plate and Fiber Sheet under the Atmospheric Environment, 19th International Corrosion Congress, CD-ROM, Jeju, Korea, 2014.
Y. S. Jeong, S. Kainuma and S. Tsukamoto : Assessment on Deformable Behaviors of The Orthotropic Steel Deck Stiffened by Bulb Rib Depending on Corrosion Damage, 7th International Conference on Thin-Walled Structures, CD-ROM, Soul, Korea, 2014.
S. Kainuma, Y. S. Jeong, N. Yagi and D. Uchida : Fatigue Behavior of Out-of-plane Gusset Welded Joints with One Side Fillet Weld, Sixth International Conference on Engineering Failure Analysis, CD-ROM, Lisbon, Portugal, 2014.
2013
S. Kainuma, Y. Yamamoto and Y. Itoh : Practical Method for Estimating Corrosion Depth of Uncoated Carbon Steel Using Thickness of the Corrosion-product Layer, 12th International Conference on Fracture and Damage Mechanics, Sardina, Italy, Key Engineering Materials, Vol.577-578, pp.201-204, 2013.
M. Yamauchi, M. Fujii, S. Kainuma and H. Hirai : Influence of Remaining Lifting Piece on Fatigue Strength of Orthotropic Steel Decks, 2013 International Orthotropic Bridge Conference, CD-ROM, Sakuramento, USA, 2013.
J. H. Ahn, S. Kainum, I. T. Kim and Y. S. Jeong : Assessment of Shear Behaviors of a Web Panel with Free lower boundary, 2013 AMEE Workshop on Civil Engineering and Materials Science, CD-ROM, Hong Kong, China, Advanced Materials Research Vol.684, pp.116-119, 2013.
Y. S. Jeong, S. Kainuma and J. H. Ahn : Investigation on Corroded Figuration of Weathering and Carbon Steel Using Spatial Statistics, 2013 AMEE Workshop on Civil Engineering and Materials Science, CD-ROM, Hong Kong, China, Advanced Materials Research Vol.684, pp 120-124, 2013.
2012
S. Kainuma, J. H. Ahn, Y. S. Jeong and H. Takahashi: Examination of fatigue crack detection using micro-encapsulated dye mixing paint, 1st International Conference of Advances in Structural Health Management and Composite Structures, CD-ROM, Jeonbuk, South Korea, 2012.
Y. S. Jeong, S. Kainuma and J. H. Ahn: Stress Concentration Factor of Time-Dependent Corroded Surfaces for uncoated Carbon Steel Plates, 1st International Conference of Advances in Structural Health Management and Composite Structures, CD-ROM, Jeonbuk, South Korea, 2012.
M. Yamauchi, M. Fujii, S. Kainuma and H. Hirai: Influence of Remaining Lifting Piece on Fatigue Strength of Orthotropic Steel Decks, 2013 International Orthotropic Bridge Conference, CD-ROM, USA, 2012.
S. Kainuma, J. H. Ahn, Y. S. Jeong,H. Sugiyama,A. Tabata and M. Iwasaki: Structural Behaviors of the Fatigue-Cracked Orthotropic Steel Bridge Deck With Bulb Ribs, Fifth International Conference on Engineering Failure Analysis, CD-ROM, Hague, Netherlands, 2012.
Y. S.Jeong,S. Kainuma and J. H. Ahn: Numerical Evaluation of Time-Dependent Corroded Steel Surface Under Various Atmospheric Environments, Fifth International Conference on Engineering Failure Analysis, CD-ROM, Hague, Netherlands, 2012.
2011
Y. Itoh and S. Kainuma: Evaluation of Atmospheric Environment and Time-Dependent Corrosion Depth for Unpainted Carbon Steel Using Zn/Ag ACM Corrosion Sensor, Proceedings of 18th International Corrosion Congress, CD-ROM, Perth, Australia, November, 2011.
S. Kainuma and Y. Itoh: Applicability of an ACM type corrosion sensor to evaluations of corrosive environments in gas piping, Proceedings of The European Corrosion Congress, EUROCORR 2011, CD-ROM, Stockholm, Sweden, September, 2011.
S. Kainuma and Y. S. Jeong: Spatial Statistical Analyses for Time-dependent Corroded Surfaces of Uncoated Weathering Steel Plates in Various Corrosive Environments, Proceedings of 8th International Conference on Fracture and Damage Mechanics, CD-ROM, Dubrovnik, Croatia, September, 2011.
2010
S. Kainuma, Y. Mukaigawa, Y. Itoh, Y. Jeong and I. T. Kim: Spatial Statistical Simulation for Time-dependent Corroded Surfaces of Carbon Steel Plates in Various Corrosive Environments, Proceedings of 4th International Conference on Structural Engineering, Mechanics and Computation, CD-ROM, Cape Town, South Africa, September, 2010.
2009
S. Kainuma, K. Sugitani, Y. Itoh And I. T. Kim: Evaluation Method for Time-Dependent Corrosion Behavior of Carbon Steel Plate Using Atmospheric Corrosion Monitoring Sensor, Proceedings of 6th International Conference on Fracture and Damage Mechanics, Advances in Fracture and Damage Mechanics VIII,pp.417-420, Malta, September, 2009.
H. Matsushita, S. Inokuchi, D. Uchida, A. Kawabata and S. Kainuma: Development of the Experimental Method for Fatigue Cracks on Weld Roots between Deck Plates and U-Shaped Ribs in Orthotropic Steel Decks, Proceedings of 8th Japanese-German Bridge Symposium, CD-ROM, Germany, August, 2009.
S. Kainuma, K. Sugitani, Y. Itoh and I. T. Kim: Evaluation Method for Time-Dependent Corrosion Behavior of Carbon Steel Plate Using Atmospheric Corrosion Monitoring Sensor, Proceedings of 6th International Conference on Fracture and Damage Mechanics, May, 2009.
2008
S. Inokucchi, S. Kainuma, A. Kawabata and D. Uchida: Field Measurement and Development of an Experimental System for Fatigue-Cracking from Weld Roots between Deck Plate and U-rib in Orthotropic Steel Decks, Proceedings of 2008 International Orthotropic Bridge Conference, August, 2008.
2007
I. T. Kim, S. Kainuma and N. Hosomi: Corrosion and fatigue behaviors of steel plates in boundary with concrete, Proceedings of 4th Structural Engineering and Construction Conference, CD-ROM, Melbourne, Australia, September, 2007.
S. Kainuma, N. Hosomi and I. T. Kim: Fatigue Behavior of Corroded Structural Steel Members in Boundary with Concrete, Proceedings of 6th International Conference on Fracture and Damage Mechanics, July, 2007.
S. Kainuma, N. Hosomi and I. T. Kim: Fatigue Behavior of Corroded Structural Steel Members in Boundary with Concrete, Proceedings of 6th International Conference on Fracture and Damage Mechanics, Advances in Fracture and Damage Mechanics VI, pp.245-258, Madeira, Portugal, July, 2007.
2005
S. Kainuma, N. Hosomi and S. Hino: Numerical Simulation of the Time-Dependent Corroded Surface of Structural Steel Members in Boundary with Concrete, Proceedings of International Conference on Structural Condition Monitoring and Damage Identification, CD-ROM, Perth, Australia, December, 2005.
2003
I. T. Kim, Y. Itoh, Y. Kadota, S. Kainuma: Corrosion Characteristic of Painted Steels with Different Surface Preparation, Proceedings of the 7rd Korea-Japan Joint Seminar Steel Bridge, pp.237-244, August, 2003.
2002
S. Kainuma, N. Hoshomi, I. T. Kim and Itoh: Fatigue Behavior of Corroded Out-of-plane Gusset Welded Joints, Proceedings of the Second International Conference on Advances in Structural Engineering and Mechanics, CD-ROM, August, 2002.
Y. Itoh, A. Yazawa, T. Kitagawa, S. Kainuma, Y. Yamamoto and Y. Kutsuna: Study on Environmental Durability of Rubber Bearing for Bridges, Proceedings of IABSE Symposium Melbourne, pp.1-7, January, 2002.
2001
Y. Itoh, A. Iwata, S. Kainuma, K. Kadota and T. Kitagawa: Accelerated Exposure Tests of Durability for Steel Bridges, Proceedings of the Eighth East Asia-Pacific Conference on Structural Engineering and Construction, CD-ROM, December, 2001.
Y. Itoh, K. Usami, R. Kusama, and S. Kainuma: Numerical Analyses of Steel and Aluminum Alloy Bridge Guard Fences, Proceedings of the Eighth East Asia-Pacific Conference on Structural Engineering and Construction, CD-ROM, December, 2001.
S. Kainuma, T. Mori and Y. Itoh, Numerical Analysis on Fatigue Failure Modes in Load- carrying Fillet Welded Cruciform Joints, Proceedings of the First International Structural Engineering and Construction Conference, pp.863-867 , January, 2001.
1999
S. Kainuma, K. Yamada, N. Kagawa, H. Ishii and T. Nishioka: Fatigue Tests of Web Gap Plate with Semi-Circular Cut-Out in Plate Girder Bridge, Proceedings of the 5th Korea-Japan Joint Seminar on Steel Bridge, pp. 445-455, October, 1999.
I. T. Kim, K. Yamada, S. Kainuma and K. Itoh: Fatigue Test of Tensile Plates with Inclined Fillet Welded Ribs, Proceedings of the 5th Korea-Japan Joint Seminar on Steel Bridge, pp.313-320, October, 1999.
T. Ojio, H. Shinkai, K. Yamada and S. Kainuma: Recent Development of Bridge Weigh-In- Motion Systems, Proceedings of the 5th Korea-Japan Joint Seminar on Steel Bridge, pp. 257-268, Octorber, 1999.
S. Kainuma, Y. Kawamoto, D. Takamatsu and K. Yamada: Fatigue Tests of Load-Carrying Fillet Welded Cruciform Joints with Root Gap, Proceedings of the Seventh East Asia-Pacific Conference on Structural Engineering and Construction, pp. 213-218,August, 1999.
T. Mori and S. Kainuma: A study on Fatigue Crack Initiation Points in Load- Carrying Type of Cruciform Fillet Welded Joints, Proceedings of the Seventh East Asia-Pacific Conference on Structural Engineering and Construction, pp. 219-224, August, 1999.
K. Yamada, S. Kato, A. Okabe, S. Kainuma and T. Ojio: Fatigue Behavior of Tensile Plates with Inclined Fillet Welded Ribs, Proceedings of the Seventh East Asia-Pacific Conference on Structural Engineering and Construction, pp. 225-230, August, 1999.
N. Kagawa, K. Yamada, S. Kainuma and T. Nakamura: Fatigue Behavior of Improved Welded Cover Plate Detail, Proceedings of the Seventh East Asia-Pacific Conference on Structural Engineering and Construction, pp. 171-176, August, 1999.
1998
S. Kainuma, K. Yamada, N. Kagawa, T. Nishioka and H. Ishii: Improving Method of Fatigue Life of Web Gap Plate by Semi-Circular Cut-Out, Proceedings of the Sixth East Asia-Pacific Conference on Structural Engineering and Construction, pp.1713-1718, January, 1998.
K. Yamada, S. Kainuma, M. Suzuki and A. Kondo: Fatigue Tests of Gusset-Welded Specimens with Side Static Load, Proceedings of the Sixth East Asia-Pacific Conference on Structural Engineering and Construction, pp.1719-1724, January, 1998.
K. Yamada, N. Okado, Q. Cao and S. Kainuma: Fatigue Crack Growth Behavior of Structural Steel after Periodic Overload and Variable Amplitude Block Loading, Proceedings of the Sixth East Asia-Pacific Conference on Structural Engineering and Construction, pp. 1761-1766, January,1998.
T. Ojio, K. Yamada, S. Kainuma and T. Obata: Measurement of Wheel Loads Using Orthotropic Steel Deck, Proceedings of the Sixth East Asia-Pacific Conference on Structural Engineering and Construction, pp. 411-416, January,1998.
1997
K. Yamada, T. Ojio, S. Kainuma and T. Obata: Stress Measurement and Repair of a Fatigue Cracked Box Girder Bridge, Proceedings of IABSE Workshop Lausanne, pp.149-157, March, 1997.
1996
S. Kainuma, K. Amada, N. Kagawa, T. Nishioka and H. Ishii: Improving Effect on Fatigue Strength of Web Gap Plate by Semi-circular Cut-out, Proceedings of Asian-Pacific Symposium on Bridge and Fatigue, pp.71-78, December, 1996.
K. Yamada, S. Kainuma and T. Ojio: Stress Measurements of Orthotropic Steel Deck of A Box Girder Bridge, Proceedings of Asian-Pacific Symposium on Bridge and Fatigue, pp.55-60, December, 1996.
K. Yamada, S. Kainuma and H. Tanaka: Some Practical Aspects of Fatigue Analysis Using Fracture Mechanics, Proceedings of International Conference on Urban Engineering in Asian Cities in the 21st Century, November, 1996.
K. Yamada and S. Kainuma: Practical Aspects of Fracture Mechanics Applied to Fatigue, Proceedings of the Fourth International Symposium on Structural Engineering for Young Experts, Vol.1, pp.1-13, November, 1996.
1994
K. Yamada, A. Kondo, S. Kainuma, H. Tanaka and N. Okado: Fatigue Behavior of In-Plane Side Gusset Subjected to Biaxial Loads, Proceedings of the 3rd Korea-Japan Joint Seminar Steel Bridge, pp.217-219, October, 1994.

pagetop